View source for Source Inversion

The source inversion problem is a very basic problem in mixed-integer PDE constrained optimization. It has one PDE constraint equivalent to an inhomogenous Poisson problem with Robin-type boundary conditions. This type of problem arises naturally from the task of finding stationary solutions to the heat equation where the problem domain represents a medium being either heated or cooled and heat is lost to a surrounding medium at a rate proportional to the difference between the temperatures of the domain boundary and the surrounding medium.

The right hand side of Poisson's equation is sometimes referred to as the ''source term''. For the purposes of the source inversion problem, the source term is assumed to be a linear combination of a finite set of predefined terms with coefficients being chosen from <math>\lbrace 0, 1 \rbrace</math>. The objective is to find a source term such that the solution of the Poisson problem closely tracks a given function over the domain.

= Problem Statement =

For the purposes of this discussion, we will restrict ourselves to a one-dimensional setting and assume that the domain under consideration is the interval $[0,1]$. The Poisson problem with simple Robin-type boundary conditions then takes the following form:

:<math>
\begin{array}{rll}
  - u'' &= f \qquad & \text{in } (0,1)\\
  u'(0) &= u(0) & \\
  u'(1) &= -u(0) &
\end{array}
</math>

Here, <math>f</math> denotes the source term. For a more general version of Robin-type boundary conditions, refer to the [[Controlled Heating|controlled heating problem]] which discusses the same problem in a multi-dimensional setting. Given a control grid <math>0 < \bar{x}_1 < \ldots < \bar{x}_{n_w} < 1</math>, the elementary source terms are given by:

:<math>
  f_i(x) = a \cdot \exp \left( \frac{(x - \bar{x}_i)^2}{b} \right)
</math>

The parameters <math>a</math> and <math>b</math> are shared between the individual elementary source terms. Given a reference function <math>u_d</math>, the source inversion problem is given by:

:<math>
\begin{array}[t]{rl}
  \min\limits_{u,w} & \int\limits_0^1 (u - u_d)^2 \, \mathrm{d}x \\
  \text{s.t.} & \begin{array}[t]{rll}
    -u'' &= \sum\limits_{i = 1}^{n_w} w_i f_i \qquad &\text{in } (0,1) \\[1.5ex]
    u'(0) &= u(0) & \\
    u'(1) &= -u(1) & \\[1.5ex]
    \sum\limits_{i = 1}^{n_w} w_i &\leq N \\
    w_i &\in \lbrace 0, 1 \rbrace \qquad & \forall i \in \lbrace 1, \ldots, n_w \rbrace
  \end{array}
\end{array}
</math>

== Weak formulation ==

Some PDE discretization techniques (such as [[wikipedia:Finite Element Method|finite element methods]]) require the use of [[wikipedia:Weak solution|weak formulations]] of the original problem. The weak formulation of the Poisson problem with Robin-type boundary conditions as described above is obtained using [[wikipedia:Green's identities|Green's identities]]:

:<math>
  \int\limits_0^1 \left\langle \nabla u, \nabla v \right\rangle \,\mathrm{d}x + u(1) \cdot v(1) - u(0) \cdot v(0) = \int\limits_0^1 f \cdot v \,\mathrm{d}x \qquad \forall v \in V
</math>

Here, <math>V</math> is a suitable space of test functions. The optimization problem then takes the following form:

:<math>
\begin{array}[t]{rl}
  \min\limits_{u,w} & \int\limits_0^1 (u - u_d)^2 \, \mathrm{d}x \\
  \text{s.t.} & \begin{array}[t]{rll}
    \int\limits_0^1 \left\langle \nabla u, \nabla v \right\rangle \,\mathrm{d}x + u(1) \cdot v(1) - u(0) \cdot v(0) &= \sum\limits_{i = 0}^{n_w} \left( w_i \cdot \int\limits_0^1 f_i \cdot v \,\mathrm{d}x \right) \qquad &\forall v \in V \\[1.5ex]
    \sum\limits_{i = 1}^{n_w} w_i &\leq N \\
    w_i &\in \lbrace 0, 1 \rbrace \qquad & \forall i \in \lbrace 1, \ldots, n_w \rbrace
  \end{array}
\end{array}
</math>

= Parameters =

For testing purposes, the following parameters were chosen:

:<math>
\begin{array}{rl}
  n_w &= 8 \\
  \bar{x} &= \left( 0.0625, 0.1875, 0.3125, 0.4375, 0.5625, 0.6875, 0.8125, 0.9375 \right)^T \\
  a &= 100 \\
  b &= 0.02
\end{array}
</math>

The reference solution <math>u_d</math> is generated as a solution to the Poisson problem using the following source term:

:<math>
  f_d(x) = 100 \cdot \left( \exp \left( \frac{(x - 0.5)^2}{0.02} \right) + \exp \left( \frac{(x - 3 / \pi)^2}{0.02} \right) \right)
</math>

= Reference solution =

''(There are currently no reference solutions for this problem)''

[[Category:MIPDECO]]
[[Category:PDE model]]